Seat 2007 Cordoba Owner's Manual page 201

Wheel trims
The wheel trims must be removed to gain access to the wheel
bolts.
Dismantle
– Insert the extraction hook of the tools in the hole for this purpose
⇒ fig.
131.
– Pull off the hub cap.
Safety First
Fig. 131 Changing the
wheel: Removing a hub
cap
Operating instructions
Wheel covers*
The wheel covers must be removed for access to the wheel
bolts
Dismantle
– Remove the wheel cover using the wire hook
– Hook this into one of the cut-outs of the wheel cover.
Fit
– Fit the wheel cover onto the wheel rim by pressing it firmly. Put
pressure initially on the point of the cut-out for the valve. Next fit
the rest of the hubcap.
Tips and Maintenance
If and when
Fig. 132 Remove hub
caps
⇒ fig.
132.
Technical Data
199