Seat 2007 Cordoba Owner's Manual page 50

48 Child safety
Securing the child seat using the "ISOFIX" and "Toptether"
system or the antirotation mechanism/system
Child seats with the "ISOFIX" and "Toptether" system can be
secured quickly, easily and safely on the rear outer seats.
When removing or fitting the child seat, please be sure to follow the
manufacturer's instructions.
– Move the seat as far to rear as it will go.
– Press the child seat onto the "ISOFIX" retaining rings until the
child seat can be heard to engage securely. If the child seat is
equipped with "Toptether" anchor points, secure it to the corre-
spondent ring. If the child seat is fitted with any other antirota-
tion system, follow the manufacturer instructions carefully.
– Pull on both sides of the child seat to ensure that it is secure.
Two"ISOFIX" retaining rings are fitted on each rear seat. In some vehicles, the
rings are secured to the seat frame and in others they are secured to the rear
floor. Access to "ISOFIX" rings is between the rear back rest and the seat.
"Toptether" rings are located in the space behind the rear seats. They are
often located on the rear of the seat backs.
Child seats with "ISOFIX" and "Toptether" mountings are available from the
Authorised Service Centres.
•
The retaining rings are designed only for use with "ISOFIX" and
"Toptether" child seats.
•
Never secure child seats that do not have the "ISOFIX" or Toptether
system, retaining belts or objects to the fastening rings – this can result in
potentially fatal injuries to the child!
•
Ensure that the child seat is secured correctly using the "ISOFIX" and
Toptether anchors.
Fig. 30 ISOFIX securing
rings
WARNING