Seat 2007 Cordoba Owner's Manual page 216

214 If and when
Main beam lights
– Raise the bonnet.
– Remove the loops
arrow and remove the cover.
– Remove the lamp cable connector
– Undo the retainer spring and remove.
– Remove the lamp and fit the new lamp in the same position,
making sure it sits correctly.
– Press the retaining spring on the lamp base and clip on.
– Plug in the connection cable.
– Fit the plastic cover and replace the loops
Fig. 144 Main beam lamp – Check the headlight adjustment.
Fig. 145 Main beam lamp
A ⇒ fig. 144
outwards in the direction of the
2
A ⇒ fig.
145.
B
A ⇒ fig.
2
144.