Seat 2007 Cordoba Owner's Manual page 73

- Auto-locking to prevent involuntary unlocking
- Automatic speed dependent locking and unlocking system*
- Emergency unlocking system
Note
For anti-theft security, only the driver's door is fitted with a lock cylinder.
Safety system "Safe"
This is an anti-theft device consisting of a double lock for the
door locks and a deactivation function for the boot in order to
make forced entry more difficult.
Activation
The "safe" system is activated when the vehicle is locked using the key or the
remote control.
To activate this system with the key, rotate the key once in the door lock
cylinder in the locking direction.
To activate the system using the remote control, press the lock button on the

remote once.
When this system is activated, it is not possible to open the doors normally,
from the outside or the inside. The boot/tailgate may not be opened. The
central locking button does not work.
Voluntary deactivation
The "Safe" system can be deactivated voluntarily by the user.
This is done by locking two times in quick succession (in under 2 seconds).
This double locking can be executed using the key or the remote control.
Using the key, rotate the lock cylinder twice in the locking direction.
Safety First Operating instructions
To activate the system using the remote control, press the lock button on the

remote twice.
When the "Safe" system is deactivated, the alarm volumetric sensor is also
deactivated.
When the "Safe" system is deactivated, the doors are locked using the simple
locking system, meaning that they may be opened from the interior but not
from the exterior.
Involuntary deactivation
The methods described for deactivation of the "Safe" system may be
executed involuntarily (for example, if we press the button
want to lock the vehicle, and it locks as a result, however, we are not sure that
it is locked and we press the button once more within 2 seconds, we will have
deactivated the "Safe" system).
Deactivation when opening
To deactivate the system on opening, see "Selective unlocking system*"
"Safe" status
On the driver's door, there is a light indicator visible from the outside of the
vehicle that indicates the "Safe" system status.
We can see that the "Safe" system is activated, by the flashing of the light
indicator. The indicator will flash on all vehicles, whether they are fitted with
an alarm or not, and until the vehicle is unlocked.
Remember:
Safe activated with or without alarm: Indicator flashes continuously.
Safe deactivated without alarm: The indicator remains off.
Safe deactivated with alarm: The indicator remains off.
Tips and Maintenance
Unlocking and locking
 because we
Technical Data
71