"Start" → "Program"→ "client software 4.0" after installation.
Fig. 3.5 Remote Parameters Config
【Notice】 Security level settings are necessary for browsing equipments by IE.
Please open the IE browser and set the security level to "Low" in "Tools/ Internet
Options/ Security/ Customize" or enable the "ActiveX Controls and Plug-Ins"
directly.
3.2 Parameter Configuration through Client Software
After the installation of client software 4.0, click the "client software 4.0 "in
"Start"→ "Program"→ "client software 4.0", a message box of "Register
Administrator" as Fig. 3.6 will appear by then for the first time running. Both the user
name and password should be no less than 6 digits for registration.
【Notice】 Please keep the user name and password in mind .You may not be able
to get access to the software if any of them is missing.
15