Table of Contents
Advertisement
2.1 Notice
1. Please check if all the items on the package list have been included with your
camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prevent any damage caused by un-matching
problems.
5. This product is not for any environment of high humidity or high temperature.
Conditions of rain, airlessness or frequent shaking are also prohibited.
6. If the product does not operate properly, please contact your dealer or the
nearest service center. Never attempt to disassemble the camera yourself. Users
are responsible for any problem caused by modification or repairing without
authorization.
【Notice】Power supply, lens and SD card are optional.
【Notice】The lens should be CS mount and its mass should be less than 1kg, and
the prominent part behind the mount surface should be less than 5mm.
【Notice】Please use a C mount adaptor for C mount lens.
2.2 Panels Description
2.2.1 Side Elevation of the Camera
Chapter 2 Installation
Fig 2.2.1 Side Elevation of the Camera
4
Advertisement
Table of Contents
