Table of Contents
Advertisement
There are several network parameters of the camera that need to be set after the
hardware installation. Those parameters including IP address, subnet mask and port
number, etc. can be set through various kinds of methods, 2 of which are introduced as
below.
1. Set the camera parameters such as IP address and PPPOE through IE.
2. Set the camera parameters through the client software.
Please make sure that the PC and network camera are connected and can ping
successfully before the parameter setting. 2 different ways of connections are showed as
Fig. 3.1 & Fig. 3.2.
Fig.3.1 Direct Line Connection
3.1 Set Parameters through IE
The default IP of the camera is 192.0.0.64 with 8000 as the default port, admin as
the administrator, and 12345 as the password. The administrator can create up to 15
separate operators with different right levels.
To login the camera through IE, input the IP address in the address column, and the
"Login" dialog box will pop-up as Fig. 3.3. Input your user name and password, and
then click "Login" to enter the "preview" page. Double click the "Camera 01" channel
or "Preview" button to view the menu as Figure 3.4. Right click the "Camera 01"
channel, and the "Main Stream"、"Sub Stream" and "Open sound" options will popup.
Select the Open sound option.
Chapter 3 Parameters Configuration
Fig.3.2 Cross Line Connection
13
Advertisement
Table of Contents
