Parameter Configuration Through Client Software - HIKVISION 2DC Series User Manual

For more specific information of "Remote Parameters Config", please refer to "Instructions of Client
Software (version 4.01)" from Section 2.5.3 of remote-distance parameter settings. Instructions can be
found in the client software4.01 in the path of "Start" → "Program"→ "client software 4.01" after
installation.

3.3 Parameter Configuration through Client Software

After the installation of client software 4.01, click the "client software 4.01" in "Start"→
"Program"→ "client software 4.01", a message box of "Register Administrator" as Fig. 3-3-1 will appear
by then for the first time running. Both the user name and password should be no less than 6 digits for
registration.
[Notice] Please keep the user name and password in mind .You may not be able to get access to the
software if any of them is missing.
Fig. 3-2-4 Remote Parameters Config
15