Configuration Via Client Software - HIKVISION DS-2CD802PF-E User Manual

24
User Manual of Network Camera
dialog box to pop up, and then set the parameters like IP address, etc. for your demand as Figure
3.3.4.
th
Enter the menu by invoking the 95 preset. Select the function you want by clicking the direction
key. Click the IRIS+ button you can enter the submenu. The menu operation is like the remote
control.
Note: If plug the SD card into the camera, user should enter the "config" and select "other function"
to format the SD card.
For more specific information of "Remote Parameters Config", please refer to "iVMS-4000(v2.0)
introductor.pdf". Instructions can be found in the client software iVMS-4000(v2.0) in the path of
"Start"-> "All Programs"-> "iVMS 4000(v 2.0)" after installation.
Figure 3.3.4 Remote Parameters Configuration

3.4 Configuration via Client Software

Please refer to "iVMS-4000(v 2.0) introductor.pdf" for detailed client software installation. You can
find the document in the PC Operating System after the installation of client software 4000 v 2.0 by
selecting "Start"-> "All Programs"-> "iVMS 4000( v 2.0)" -> "iVMS 4000( v 2.0) introductor".
After the installation of client software-4000(v2.0), there is a short-cut icon named "Client
Software-4000(v2.0)" on computer's desktop. Please double click client software icon, a message
box of "Register Administrator" as Figure 3.4.1 will appear the first time running. Password should