Table of Contents
Advertisement
Cautions：
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. If cleaning is necessary, please use a dryer to blow the dust away from the lens
and filter. Please use dry and soft cloth for outside panels cleaning. For persistent
smudges, use soft cloth with a bit of cleaning agent, wipe it gently and dry it after
all the above operations.
Volatile solvents like ethanol, benzene and dilution agent are all forbidden,
or they may damage the surface of the panels otherwise.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfunction however), and affecting the
endurance of CCD at the same time.
5. The CCD may be burned out by a laser beam, so when any laser equipment is on
using, make sure that the surface of CCD will not be exposed to the laser beam.
6. Do not place the camera in extremely hot, cold(the operating temperature shall be
－10℃～＋60
electromagnetism radiation.
7. To avoid heat accumulation, good ventilation is required for operating
environment.
8. Keep the camera away from liquid while on using.
9. While on a delivery, the camera shall be packed in its original packing, or packing
of the same texture.
10. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the
equipment shall be replaced regularly according to their average enduring time.
The average time varies because of differences between operating environment
and using history, so regular checking is recommended for all the users. Please
contact with your dealer for more details.
℃
), dusty or da
mp locations, and do not expose it to high
- 4 -
Advertisement
Table of Contents
