The "Playback" and "Log" functions are reserved as Fig. 3.4. To set the camera
parameters through IE browser, click "Config" and wait for the "Remote Parameters
Config" dialog box to pop up, and then set the parameters like IP address, etc. for your
demand as Fig. 3.5.
For more specific information of "Remote Parameters Config", please refer to
"Instructions of Client Software (version 4.0)" from Section 2.5.3 of remote-distance
parameter settings. Instructions can be found in the client software4.0 in the path of
Fig. 3.3 Login Interface
Fig. 3.4 Previewing Interface
14