HIKVISION DS-2CD752MF-FB Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2CD752MF-FB Series
  6. User manual

HIKVISION DS-2CD752MF-FB Series User Manual

Hide thumbs Also See for DS-2CD752MF-FB Series:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual , Quick Manual

NETWORK CAMERA

User Manual
V2.0.0
2009-8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-2CD752MF-FB Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-2CD752MF-FB Series

Summary of Contents for HIKVISION DS-2CD752MF-FB Series

  • Page 1: Network Camera

    NETWORK CAMERA User Manual V2.0.0 2009-8...
  • Page 2 DS-2CD862MF-E, DS-2CD852MF-E, DS-2CD762MF-FB(H), DS-2CD752MF-FB(H), DS-2CD752MF(-E), DS-2CD852F series Network Camera This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual.

  • Page 3: Safety Instruction

    User Manual of Network Camera Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into ‘Warnings’ and ‘Cautions’: Warnings: Serious injury or death may be caused if any of these warnings are neglected. Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
  • Page 4 User Manual of Network Camera 6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power cable, then contact the service center. 7. If the product does not work properly, please contact your dealer or the nearest service center.
  • Page 5 User Manual of Network Camera Notice: 1. Make sure the power supply voltage is correct before using the camera. 2. Do not drop the camera or subject it to physical shock. 3. Do not touch CCD (Charge Coupled Device) modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently.
  • Page 6 User Manual of Network Camera because of differences between operating environment and usage history, so regular checking is recommended for all users. Please contact with your dealer for more details.

  • Page 7: Table Of Contents

    User Manual of Network Camera Index Chapter 1 Introduction..............................1 1.1 Network camera Functions and Features....................... 1 1.2 Applications ..............................2 Chapter 2 Installation..............................4 2.1 Panels Description ............................4 2.1.1 Side Elevation of the Camera ......................4 2.1.2 Rear Panel Description ........................6 2.2 Product Installation............................11 2.2.1 Box camera Installation ........................11 2.2.2 Dome camera Installation .........................
  • Page 8 Specification .............................. 54 Dimension..............................55 DS-2CD852MF-E.............................. 56 Specification .............................. 56 Dimension..............................57 DS-2CD762MF-FB ............................58 Specification .............................. 58 Dimension..............................60 DS-2CD752MF-FB ............................61 Specification .............................. 61 Dimension..............................63 DS-2CD752MF-E.............................. 64 Specification .............................. 64 Dimension..............................65 DS-2CD852F ..............................66 Specification .............................. 66...

  • Page 9: Chapter 1 Introduction

    User Manual of Network Camera Chapter 1 Introduction Network camera is a kind of embedded digital surveillance product that combines the features of both traditional analog camera and net DVS (Digital Video Server). Due to the embedded Linux operation system and the latest Davinci hardware platform of TI, the system operates with high scheduling efficiency.

  • Page 10: Applications

    User Manual of Network Camera  Support resolution of 4CIF (PAL:704 × 576, NTSC:704 × 480), DCIF (PAL:528 × 384, NTSC:528 × 320), 2CIF (PAL:704 × 288, NTSC:704 × 240), CIF (PAL:352 × 288, NTSC:352 × 240),QCIF (PAL:176 × 144, NTSC:176 × 120). Support resolution up to 1600×1200 Pixels for 2.0 megapixels Network Camera.
  • Page 11 User Manual of Network Camera 4. AI building/district management systems. 5. Self-service systems of power plants. 6. Outdoor monitoring systems for bridges, tunnels and crossroad traffic. 7. Pipelining and warehouse monitoring. 8. 24-hour monitoring for road traffic. 9. Remote monitoring of forest and water resources. 10.

  • Page 12: Chapter 2 Installation

    User Manual of Network Camera Chapter 2 Installation Notes： 1. Please check if all the items on the package list have been included with your camera. 2. Read the following contents carefully before the installation. 3. Make sure that all the related equipment is power-off during the installation. 4.
  • Page 13 User Manual of Network Camera Fig 2.1.2 Side Elevation of DS-2CD862MF-E network camera Fig 2.1.3 Side Elevation of DS-2CD752MF-E network camera Fig 2.1.4 Side Elevation of DS-2CD752MF-FB DS-2CD762MF-FB network camera...

  • Page 14: Rear Panel Description

    User Manual of Network Camera 2.1.2 Rear Panel Description Fig. 2.1.4 Rear Panel of DS-2CD852F series 1. Standard Ethernet (UTP) RJ45 (10M/100M self-adaptive). 2. 1 channel voice talk input,3.5mm audio interface, 2.0～2.4Vp-p, 1kΩ. 3. 1 channel voice talk output, 3.5mm audio interface, electric line level, 600Ω. 4.
  • Page 15 User Manual of Network Camera Fig. 2.1.6 Rear Panel of DS-2CD852MF-E, DS-2CD862MF-E network camera 1. Standard Ethernet (UTP) RJ45 (10M/100M self-adaptive). 2. 1 channel voice talk input,3.5mm audio interface, 2.0～2.4Vp-p, 1kΩ. 3. 1 channel voice talk output, 3.5mm audio interface, electric line level, 600Ω. 4.
  • Page 16 User Manual of Network Camera Fig. 2.1.7 Rear Panel of DS-2CD752MF-E series Address& protocols dial switch, define for dial switch: , from 1 to 5 dial switch function as follows: Switch Function SHARP SOFT NAGC SAGC Notices: There are invalid dial switches for DS-2CD702, DS-2CD712, DS-2CD792, DS-2CD732 series from 6 to 10;...
  • Page 17 User Manual of Network Camera SD card slot：Supports SDHC card, and the dimensions of SD meet the market’s normal standard. Fixed Screw: Loosen this screw to rotate the camera horizontally and vertically to adjust the pan and tilt position. When the camera angle is determined, lock the fixed screw to fix the camera.
  • Page 18 User Manual of Network Camera The Ethernet interface is a RJ45 10M / 100M self-adapted Ethernet port. And the three indicate LED’s respectively mean transmission and receipt status, link status and power status. Cable Hole: User can select a cable hole from the side or bottom of the camera to thread the cables.

  • Page 19: Product Installation

    User Manual of Network Camera between TELE and WIDE, then tighten the handle. Loosen the focus lock handle, rotate it until getting a clear image between NEAR and FAR, then tighten the handle. 2.2 Product Installation 2.2.1 Box camera Installation Box camera can be fixed in both metope and ceiling.

  • Page 20: Dome Camera Installation

    User Manual of Network Camera Fig 2.2.1 Fix Ceiling Bracket Fig 2.2.2 Fix Camera Fig 2.2.3 Fix Lens 2.2.2 Dome camera Installation Dome camera can be installed include hold equipment, ceiling mounted, cylinders and other styles. Client can be installed in accordance with their own ways to achieve the installation.Please according the following specific steps to install (take ceiling mounted as example), when the wall is wood, use the self-tapping screws to fix the ceiling plate to the...
  • Page 21 User Manual of Network Camera wall surface. Fig 2.2.4 Fix card Fig 2.2.5 Fix in Ceiling Take the three columns of Dome camera insert in the three fix slot of the ceiling plate. Pay attention to the direction of insertion. Let the ceiling plate “I” logo and the Dome camera “I” logo in the same direction.

  • Page 22: Vandal Proof Dome Camera Installation

    User Manual of Network Camera Fig 2.2.6 Dome camera fixing Fig 2.2.7 Dome camera fixed 2.2.3 Vandal proof Dome camera Installation The ceiling mount is a suitable installation method for this camera. Please stick to the following steps: 1. First, loosen the screw with a hexagonal Screw driver (attached with the camera), and take down the transparent cover shown as below: Fig.

  • Page 23: Topological Graph Of Network Camera

    User Manual of Network Camera Fig. 2.2.9 Install the Camera 3. Adjust the camera’s view angle while watching the video on the adjustment monitor. Loosen the fixed screws, and adjust horizontally and vertically the camera pan and tilt. Adjust the lens focus to get optimal video effect.
  • Page 24 User Manual of Network Camera Megapixels Network Dome Camera Application: Notice:...

  • Page 25: Client Software Installation

    User Manual of Network Camera Fig 2.1.12 Alarm output The alarm output is an on/off output that requires external power supply on connection. The external power supply shall be 12V DC/30mA, or use AC with external relays. Equipment damage or electric shock may cause if without relays. 2.3 Client Software Installation Note: It is recommended that user’s computer adopted INTEL P3, P4, C4, Core4 CPU, and...
  • Page 26 User Manual of Network Camera Fig.2.3.1 Client Software Installation Step2: Input “User Name”, “Company Name”; Fig.2.3.2 Customer Information Step3: Select the destination folder and click ‘Next’ to go to the next step.

  • Page 27: Chapter 3 Parameter Configuration

    User Manual of Network Camera Fig2.3.3 Ready to Install the Program Step4: Click ‘Install’ to start installation till finish the installation; Fig2.3.4 Installation Complete Click the ‘Finish’ button to close the dialog box. After the client software has been installed, you can find the remote client software through “Start”...

  • Page 28: Visit Network Camera In Lan

    Before visiting network camera, user should detect its IP address. SADP is a tool software which can automatically detect hikvision’s network device in the LAN and give the device’s information like IP address, mask, port number, device serial number, software version and so...

  • Page 29: Configuration Via Web Browser

    User Manual of Network Camera Fig. 3.1.2 Select the device, and set its IP address and mask at the same network segment with the PC. The detailed introduction of SADP, please refer to Appendix 1. 3.2 Configuration via Web browser Before visit the camera via web browser, user should adjust security level.
  • Page 30 User Manual of Network Camera Fig. 3.2.1 Set the Security Level The default IP of the camera is 192.0.0.64 with 8000 as the default port, admin as the...
  • Page 31 User Manual of Network Camera administrator, and 12345 as the password. The administrator can create up to 15 separate operators with different right levels. To login the camera through IE, input the IP address in the address column, and the “Login” dialog box will pop-up as Fig.
  • Page 32 User Manual of Network Camera Fig 3.2.3 Preview Interface The “Playback” and “Log” functions can be used only in the condition of existing SD card. To set the camera parameters through IE browser, click “Config” and wait for the “Remote Parameters Config”...

  • Page 33: Configuration Via Client Software

    User Manual of Network Camera Fig. 3.2.4 Remote Parameters Configuration 3.3 Configuration via Client Software After the installation of client software-4000(v2.0), there is a short-cut icon named “Client Software-4000(v2.0)” on computer’s desktop. Please double click client software icon, a message box of “Register Administrator” as Fig. 3-4-1 will appear the first time running. Password should be more than 6 digits for registration.
  • Page 34 User Manual of Network Camera “Preview” menu as Fig. 3.3.3. Fig. 3.4.2 User Login Fig. 3.4.3 Preview Menu Click the “Configure” button in Fig. 3.3.4, and then right click the blank white space. Click the “Add Area” button, and the “Add Area” message will pop up.
  • Page 35 User Manual of Network Camera Fig. 3 .4.4 Add Area Fig. 3.4.5 Add Area Properties Input the area name (you can create whatever name you like) and click “OK” as Fig. 3.3.6. Then right click the area you have just created as Fig. 3.3.7.
  • Page 36 User Manual of Network Camera Fig. 3.4.6 Area Name Adding Completed Fig. 3.4.7 Right Click the Area Name Click “Add Device”, and the “Add Device” dialog box will pop up as Fig. 3.3.8. Input your “Device Name”. Select “Normal” from “Register” option. Input your camera IP in “Device IP”,...
  • Page 37 User Manual of Network Camera e.g. 192.0.0.64; “User Name”: admin, “Password”: 12345, and 8000 for the default “Port”, and then modify “Channel” to 1. Click the “OK” button as Fig. 3.3.8. Fig. 3.4.8 Add Device Fig.3.4.9 Camera Adding Completed...
  • Page 38 User Manual of Network Camera Click the “Preview” button to enter the “Preview” menu as Fig. 3-3-10. Double click the channel name in the left tree to preview the camera feed. Double click the channel Fig.3.4.10 Preview Menu Please refer to “Client Software-4000(v2.0)_ENG.pdf” for a more detailed parameters configuration.
  • Page 39 User Manual of Network Camera Fig.3.4.11 Remote Configuration...

  • Page 40: Visit Network Camera In Internet

    User Manual of Network Camera 3.4 Visit Network Camera in Internet 3.4.1 Visit network camera with static IP When there is a static IP from an ISP, open some ports (such as 80 and 8000 ports) in the router. Then a user can visit it through a web browser or client software via the internet. The steps for port forwarding are different for each model of router.

  • Page 41: Visit Network Camera With Dynamic Ip

    User Manual of Network Camera Fig.3.5.3 Selecting Normal Mode 3.4.2 Visit network camera with dynamic IP Fig.3.5.4 Visit camera through PPPoE dail-up This camera supports the PPPoE auto dial-up function, connecting the camera to a Modem for dial-up access to an ADSL network to get a public IP address; First, through local network access to the network camera, select “Configure””Right Click the Device”, Select “Remote Configuration”, Select “PPPoE Settings”...
  • Page 42 User Manual of Network Camera the IP address always changes accompanied with modem rebooting. Fig.3.5.5 PPPoE configuration dialog box It is inconvenient to view a network camera with a dynamic IP, therefore, users should register with a dynamic DNS service provider. (Such as DynDns.com) Domain name resolution contains normal domain name resolution and private domain name resolution.
  • Page 43 User Manual of Network Camera Fig.3.5.6 Normal Domain Name Resolution Apply a domain name from a domain name provider, then view the camera via the applied domain name. If the camera connects to the internet via a router, users should port forward the router.
  • Page 44 User Manual of Network Camera Fig.3.5.8 Private Domain Name Resolution A PC with a static IP which is running the domain name resolution service is necessary. When the network camera connects to the internet through PPPoE and obtains an IP address, it will send its name and IP address to the resolution server.

  • Page 45: Chapter 4 Menu Introduction

    User Manual of Network Camera Chapter 4 Menu Introduction Note: In this chapter, we call DS-2CD852MF-E, DS-2CD752MF-FB, DS-2CD752MF(-E), DS-2CD852F, as 2.0 megapixels CMOS network camera. And call DS-2CD862MF-E, DS-2CD762MF-FB as 1.3 megapixels CCD network camera. 4.1 Main Menu Call preset 95 and the menu will appear on the screen.”IRIS +” means “enter”, while “IRIS -”...

  • Page 46: Menu Introduction Of 2.0 Megapixels Cmos Network Camera

    User Manual of Network Camera The main menu displays as below: Fig.4.1.2 Main Menu 4.2 Menu Introduction of 2.0 Megapixels CMOS Network Camera 4.2.1 Language settings Press left / right to select language between Chinese and English; 4.2.2 Flicker Control Press left / right to select frequency between 50HZ and 60HZ in the FLICKER CONTROL item;...

  • Page 47: Frame Settings

    NTSC UXGA HD720p SVGA 2.5M DS-2CD852MF-E 4CIF 1.5~2M DS-2CD752MF(-E) 1.5M DS-2CD752MF-FB Dcif 1.5M 2cif 1.5M 384K~768K Qcif 384K~512K Note: DS-2CD852F’s frame and resolution relationship is different from above table. Please refer to the specifications in the Appendix. 4.2.5 Shutter settings SHUTTER can be adjusted by pressing left / right.

  • Page 48: Auto Gain Settings

    User Manual of Network Camera QCIF 2CIF DCIF 30fps 15fps 5fps 4CIF SVGA HD720p 15fps 15fps 5fps UXGA 10fps 10fps 5fps 4.2.6 Auto Gain settings Press left / right to adjust AUTO GAIN level among OFF, low, middle and high; 4.2.7 DAY / NIGHT Settings Press left / right to select DAY / NIGHT mode among DAY, NIGHT and AUTO;...

  • Page 49: White Balance Settings

    User Manual of Network Camera Fig.4.2.2 NIGHT Mode 4.2.8 White Balance Settings Press left / right to set WHITE BALANCE AUTO or OFF; 4.2.9 Effect Mode settings Press left / right to select EFFECTS MODE among OFF, SPEIA, NEGTIVE, SOLARIZE1 and SLOARIZE2;...

  • Page 50: Mirror Mode Settings

    User Manual of Network Camera Fig.4.2.3 SEPIA Mode Fig.4.1.1 NEGATIVE Mode 4.2.10 Mirror mode settings Press left / right to select MIRROR mode among OFF, LEFT RIGHT, UP BOTTOM, and CENTER;...

  • Page 51: Eptz Settings

    User Manual of Network Camera 4.2.11 ePTZ settings Press left / right to set ePTZ ON or OFF; Under the resolution of QCIF/CIF/DCIF/2CIF/VGA/D1/SVGA, support pan\tilt\zoom operation, pan and tilt operation can be carried out only after zooming in，Support 127 preset positions (95 is excluded and used to call menu).Patrol path supports the preset of movement from Top left-hand corner of the screen to the bottom right-hand, supports 8 manual disposition patrols as well.

  • Page 52: Language Settings

    User Manual of Network Camera 4.3.1 Language settings Press left / right to select language between Chinese and English. 4.3.2 Resolution settings RESOLUTION can’t be changed by pressing left / right button; User can select resolution through client software, and the path is “configuration””remote configuration” “channel configuration ”“Resolution”.

  • Page 53: Day / Night Settings

    User Manual of Network Camera 4.3.7 DAY / NIGHT Settings Press left / right to select DAY / NIGHT mode among DAY, NIGHT and AUTO; Fig.4.2.1 DAY Mode Fig.4.2.2 NIGHT Mode...

  • Page 54: White Balance Settings

    User Manual of Network Camera 4.3.8 White Balance Settings Press left / right to set WHITE BALANCE ATW1, ATW2, ATC or MANUAL; ATW1: Camera uses TTL auto white balance algorithm to ideally recovery color, temperature range is from 2500K to 6500K. ATW2: Camera uses TTL auto white balance algorithm to ideally recovery color, temperature range is from 2500K to 15000K.
  • Page 55 User Manual of Network Camera Move cursor to “BLA”, and press left / right to set the BLC area as up, down, left, right, middle or manual, then the BLC area is on the screen: BLA MANUAL setting step is as following: Move cursor to “BLA MANUAL”, and press “IRIS+”...

  • Page 56: Mirror Mode Settings

    User Manual of Network Camera Adjust the BLA size through the same operation as the above BLA position. 4.3.10 Mirror mode settings Press left / right to select MIRROR mode among OFF, LEFT RIGHT, UP BOTTOM, and CENTER;...

  • Page 57: Appendix 1 Sadp Introduction

    User Manual of Network Camera Appendix 1 SADP Introduction 1. Brief introduction SADP (Search Active Devices Protocol), can automatically search IP cameras in LAN. User can modify the IP address, subnet mask and port of the device without visiting IP address of the device. Additionally, password of the super user in this device can be recovered as default.
  • Page 58 You can reset the password of the super user as ‘12345’ in the case of a lost password. Input certain validation code into the ‘Resume default password’ box, and click ‘OK’ to finish the administrator’s password initiating. Note: Password reset code can be obtained by the technicians from Hikvision after you provide the device Serial NO.

  • Page 59: Appendix 2 Port Map

    User Manual of Network Camera Appendix 2 Port Map Note: The following setting is about TP-LINK router (TL-R410), which is maybe distinct from other router’s setting. 1. Firstly, select the router’s WAN connection Type. As the following Fig. shows: 2. Set the “network parameter” of the router as the below figure. The setting includes subnet mask and gateway.
  • Page 60 User Manual of Network Camera As the above mentioned setting, we map the router’s port 80, 8000, 554, 8200 to the network camera 192.168.1.23; and port 81, 8001, 555, 8201 to the network camera 192.168.1.24. In this way, user can visit the 192.168.1.23 through visiting the router’s port 80, 8000, 554 and 8200.

  • Page 61: Appendix 3 Pin Definition

    User Manual of Network Camera Appendix 3 Pin Definition (1)UTP between the network port of camera and HUB (Direct Cable) (2)UTP between the network port of camera and PC (Cross Cable):...

  • Page 62: Appendix 4 Product Specification

    User Manual of Network Camera Appendix 4 Product Specification DS-2CD862MF-E Specification Parameter Model DS-2CD862MF-E Camera Image Sensor 1/3 inch SONY progressive scan CCD Effective Pixels 1280 (H) × 960 (V), 1.3M CCD Min. Illumination Color: 0.1Lux @ F1.2, B / W: 0.01Lux @ F1.2 Electronic Shutter 1/4s to 1/100,000 s Auto Iris Lens...

  • Page 63: Dimension

    User Manual of Network Camera Others Working Temperature -10℃ ~ 60℃ Power Supply AC24V, ±10% / DC12V, ±10%, PoE (Power over Ethernet). Power Consumption 4W MAX (10W max with ICR working) Dimensions (mm) 68.5 x 63 x 157.5 2.71” x 2.5” x 6.25” (1.32lbs) Weight 600g...

  • Page 64: Ds-2Cd852Mf-E

    User Manual of Network Camera DS-2CD852MF-E Specification Parameter Model DS-2CD852MF-E Camera Image Sensor 1/3 inch CMOS Effective Pixels 1600 (H) × 1200 (V) 0.5Lux @ F1.2 Min. Illumination 0.1Lux @ F1.2, sense up × 5 Electronic Shutter Auto Auto Iris Lens Day&Night Electronic (ICR option) Lens...

  • Page 65: Dimension

    User Manual of Network Camera Others Working Temperature -10℃ ~ 60℃ Power Supply AC24V, ±10% / DC12V, ±10%, PoE (Power over Ethernet). Power Consumption 4W MAX Dimensions (mm) 64.8 x 63 x 157.5 2.57”x 2.5” x 6.25” (1.32lbs) Weight 600g Dimension...

  • Page 66: Ds-2Cd762Mf-Fb

    User Manual of Network Camera DS-2CD762MF-FB Specification Model DS-2CD762MF-FB Parameter Camera Image Sensor 1/3 inch SONY progressive scan CCD Effective Pixels 1280 (H) × 960 (V), 1.3M CCD Min. Illumination 0.1Lux @ F1.2 (Color), 0.01Lux @ F1.2 (B/W) Lens 3.3-12mm @ F1.4 /Auto Iris lens Day&Night Compression standard Video Compression...
  • Page 67 User Manual of Network Camera Dimension(mm) φ156 × 134.5 φ6.2” × 5.33” (3.08lbs) Weight 1400g...

  • Page 68: Dimension

    User Manual of Network Camera Dimension...

  • Page 69: Ds-2Cd752Mf-Fb

    User Manual of Network Camera DS-2CD752MF-FB Specification Model DS-2CD752MF-FB Parameter Camera Image Sensor 1/3 inch CMOS Effective Pixels 1600 (H) × 1200 (V) Min. Illumination 0.5Lux @ F1.2, 0.1Lux @ F1.2, sensitization ×5 Lens 3-9mm@ F1.4 / Fixed Iris lens Day&Night...
  • Page 70 User Manual of Network Camera Dimension(mm) φ156 × 134.5 φ6.2” × 5.33” (3.08lbs) Weight 1400g...

  • Page 71: Dimension

    User Manual of Network Camera Dimension...

  • Page 72: Ds-2Cd752Mf-E

    User Manual of Network Camera DS-2CD752MF-E Specification Parameter Model DS-2CD752MF-E Camera Image Sensor 1/3 inch CMOS Effective Pixels 1600 (H) × 1200 (V) Lens 2.8 ~ 11mm, F1.4 manual Iris lens 0.5Lux @ F1.2 Min. Illumination 0.1Lux @ F1.2, sense up × 5 Video Output 1.0Vp-p Composite Output (75Ω/BNC) Day &...

  • Page 73: Dimension

    User Manual of Network Camera (1.98lbs) Weight 900g Dimension...

  • Page 74: Ds-2Cd852F

    User Manual of Network Camera DS-2CD852F Specification Parameter Model DS-2CD852F Camera Image Sensor 1/3 inch CMOS Effective Pixels 1600 (H) × 1200 (V) 0.5Lux @ F1.2 Min. Illumination 0.1Lux @ F1.2, sense up × 5 Electronic Shutter Auto Auto Iris Lens Day&Night Electronic (ICR option) Lens...

  • Page 75: Dimension

    User Manual of Network Camera Others Working Temperature -10℃ ~ 60℃ Power Supply DC12V, ±10%, Power Consumption 3W MAX Dimensions (mm) 63*59*116 Weight 650g Dimension...
  • Page 76 User Manual of Network Camera First Choice for Security Professionals...

This manual is also suitable for:

Ds-2cd762mf-fbh seriesDs-2cd752mf-e seriesDs-2cd852f seriesDs-2cd752mf-fbh seriesDs-2cd762mf-fb seriesDs-2cd852mf-e series ... Show all

Table of Contents