Figure 2-18. Write Protection Slider on the DAT Cartridge
DAT Cartridge Insertion and Removal
Use the following information to insert and remove DAT cartridges (see
Figure 2-19).
!
To insert a DAT cartridge:
Hold the DAT cartridge horizontally, with the label side up, and insert it
slowly into the drive until it is pulled into the drive.
!
To remove a DAT cartridge:
Check that the access LED on the DAT drive is off (green). Press the
eject button on the DAT drive and carefully remove the cartridge.
DAT Drive
Figure 2-19. Inserting and Removing a DAT Cartridge
2-22 System Operation
Eject Button
Cover
DAT Cartridge