NEC 1080Xd User Manual page 187

6. Install the board in the appropriate slot.
Note:
See the previous sections in this chapter to
select the correct slot for your board type. Correct slot
location can optimize board performance.
!
Carefully remove the slot cover.
Take care when removing the slot cover. System power is
on during this installation. Dropping a slot cover can create a
short circuit, causing personal injury and damage to the
system if the slot cover makes contact with a connector.
!
Insert the board into the slot.
Figure 5-13 PCIX Unit PCI Slots
7. Replace the access cover (see Figure 5-12).
!
Swing the cover back over the slots.
!
Press the cover down and check that the cover latches are secured.
To prevent damage to the cover and chassis, check that the
cover is secured and can clear the chassis when you slide
the unit into the server.
!
WARNING
! CAUTION
I/O Board Installation 5-15