Pc (Power Cycle) - NEC 1080Xd User Manual

PC (Power Cycle)

Execution:
This command can be executed on a partition in the following state:
!
Automatic startup completed
!
Execution of UP command.
The partition is in a DC POWER ON state.
Function:
Turns off the power (DC) of the system, and then turns it on again to start up the
system.
Note:
operation state of the OS or BIOS and without notifying either.
Note:
Maintenance mode.
Screen Image
iSPyz:---> pcENTER>
CAUTION:
System power will be turned off without any notice to the softwares even if they are
running.
Enter partition number (0-3/all/CR=exit) : all<ENTER>
Execute OK? (y/[n]) y<ENTER>
PC command was accepted. System power of all partitions will be turned off soon and
then will be turned on.
[iSPyz:INFO.ccc] partition 0 : power off sequence started.
[iSPyz:INFO.ccc] partition 1 : power off sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power off sequence completed normally.
:
[iSPyz:INFO.ccc] partition 0 : power on sequence started.
[iSPyz:INFO.ccc] partition 1 : power on sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power on sequence completed normally.
:
[iSPys:INFO.ccc] partition 1 : handed off the control to BIOS.
This command turns off the system regardless of the
The PC command can be executed in Normal mode or
Table 3-43. PC Display Screen
Reference
A
B
C
D
Service Processor 3-55