NEC 1080Xd User Manual page 31

4. Locate the server LAN cable at the rear of the server cabinet. Connect a
client PC to the server LAN connection.
Note:
A LAN cable either comes already connected to
the Service Processor board or it is connected by the NEC
technician during the server installation.
5. Connect peripheral devices, such as a monitor, mouse, and keyboard, to the
rear of the server. See Figure 2-2 for server connector locations.
A
B
Figure 2-2. Server Connector Locations
When connecting a cable to an I/O board, be sure to leave
enough cable free for sliding the main chassis or PCIX unit
out of the cabinet. Route the cable so it does not get pinched
or damaged.
Route the external device cables under the rear door frame
and out of the way of the rear server door.
6. Close and lock the rear server door.
A B
VGA Monitor Connector
Mouse and Keyboard Connectors
! CAUTION
System Operation 2-3