Memory Configurations - NEC 1080Xd User Manual

This appendix provides the memory configuration and installation information
for your server.
Memory upgrades for your server require installation and
configuration by trained NEC personnel.

Memory Configurations

Each CELLV Board supports up to 16 DIMMs in the following configurations:
!
Memory must be installed in groups of 4 DIMMs of the same capacity.
!
Memory capacity can vary between different groups
!
At least one group of four DIMMs is required in the system.
!
Each CELLV Board supports up to 4 groups of 4 DIMMs.
!
A memory group includes a group of four 1-GB DDR DIMMs for total
capacity of 4 GB in a group.
!
Maximum memory capacity using 1-GB DIMMs is 16 GB per CELLV
board or 32 GB on two CELLV boards.
B-2 Memory Upgrade
! CAUTION