NEC 1080Xd User Manual page 86

cmd arg1
swap -
This subcommand is not supported at
present.
cellx
smem -
This subcommand is not supported at
present.
n
3-36 Service Processor
Table 3-35. HC Subcommands (cont'd)
arg2 arg3 arg4
- - -
celly - -
- - -
mmm - -
Description
Used to swap a CELLV Board with another
CELLV Board while the software is operating.
(This is not a combination of "attach" and
"detach". The process dedicated for "swap" is
executed.)
Displays Help for "swap" when the argument is
omitted or an error is made.
This subcommand can be executed on the
partition in the DC POWER ON state. An
execution of "swap" on the partitions requires
the online configuration and de-configuration
function of the OS.
Swaps the operating CELLV Board having the
physical number x with the CELLV Board having
the physical number y.
No partition must be associated with CELLVy.
When the swap is complete, CELLVx is
disassociated from the partition and CELLVy is
associated to the partition.
The logical CELL Board number is transferred
from CELLVx to CELLVy.
Used to specify the size of the shared memory
of the partition.
Displays Help for "smem" when the argument is
omitted or an error is made.
This subcommand can be executed on the
partition in the DC POWER OFF state.
Specifies the size of the shared memory of
partition n in units of MB.
You cannot make any change to the partitions
currently in operation.
If the size is not a multiple of 128 MB, it is
rounded up.