NEC 1080Xd User Manual page 180

3. Access the Main Chassis as follows:
!
Remove six screws (three on each side) securing the Main Chassis to the
cabinet (see Figure 5-6).
!
Locate the Main Chassis handle under the power supply modules (see
Figure 5-6). Carefully and slowly pull the chassis out of the cabinet until
the side rails lock (click) in place.
Check that the cables at the rear of the chassis are free from
being pinched or damaged when you slide the main chassis
forward.
A
Figure 5-6. Main Chassis Screws and Handle
5-8 I/O Board Installation
! CAUTION
B
A Server Screws
B Handle
A