Viewing Conference Details; Dropping Parties; Holding A Conference Call; Transferring Calls Using Conference - Avaya M7310 User Manual

5.3 Viewing Conference Details

You can display a list of the parties involved in a conference call.
1. Press Release (or press the Detail soft key).
2. The details of the parties in the conference are displayed. Your own details are always displayed first.
3. Press * (or the Next soft key) to cycle through the details of the conference parties.
4. Press Exit to return to the normal call display.

5.4 Dropping Parties

You can drop parties from a conference call, including yourself.
To Drop Yourself
1. Press Release. Your own details are displayed.
2. Press Release again.
To Drop Other Parties
1. Press Release (or press the Detail soft key).
2. The details of the parties in the conference are displayed. Your own details are always displayed first.
3. Press * (or the Next soft key) to cycle through the details of the conference parties.
4. When the party you want to drop is displayed # (or press
5. Press Exit to return to the normal call display..
Note
1. If you are the only internal user in the conference, depending on your telephone systems configuration, dropping
yourself from the conference may end the conference. Consult your system administrator for details.

5.5 Holding a Conference Call

Using the Hold key you can put a conference call on hold in the same way as you can for a normal call. The
appearance key for the conference call will show a fast flashing icon.
To take the conference call off hold, press the appearance key.
Important - Holding Conference Calls
You can hold a conference call in the same way as holding a normal call. Holding the conference call does not affect the
other conference parties who can continue talking. You will also still be listed as a member of the conference call in the
conference details.
!
Warning
·
This only applies to conference calls hosted by your own telephone system. Holding your call to a conference
hosted on another telephone system will cause that conference to hear your system's music on hold.

5.6 Transferring Calls Using Conference

When you already have a call on hold and a call connected, you can connect them by starting a conference. Press
Feature 3. Your current call and the held call will be connected. You can now
M7310 Telephone User Guide
IP Office
Conference Calls: Adding a Call to a Conference
Release).
drop yourself from the conference.
37
Page 37
- Issue 02b (05 March 2014)