Contrast; Ringer Sound; Ringer Volume; Enbloc Pre-Dialing - Avaya M7310 User Manual

11. Phone Settings

11.1 Contrast

You can change the contrast on the phone display.
1. Press Feature *7.
2. Use the number keys to select the required contrast. Alternatively, use the
contrast.
3. The function will automatically cancel after a 3 seconds.

11.2 Ringer Sound

You can change the ringer sound. This does not change the ring pattern which is controlled by the telephone system.
1. Press Feature *6.
2. Press 1 to 4 to select the required ringer sound.
· Whilst the function is active, you can also use the
3. The function will automatically cancel after a 5 seconds.

11.3 Ringer Volume

You can change the ringer volume using the following process. You can also adjust the volume while a call is ringing your
phone.
1. Press Feature *80. The phone will start a continuous ring.
2. Use the soft and loud
3. The function will automatically cancel after a 5 seconds.

11.4 Enbloc Pre-Dialing

You can enable or disable your
without the digits being dialed until the number is complete.
· This function can be assigned to a
the button includes an indicator, it will indicate the status of the function (on or off).
1. Press Feature *82.
2. The phone displays Enbloc dial and the current setting.
3. Press the on or off soft key to change the setting.
M7310 Telephone User Guide
IP Office
volume buttons to change the volume to the level required.
enbloc pre-dialing using Feature 82. When on, you can compose a number to dial
20
programmable button
and
and buttons to change the ringer volume.
. This allows it to be accessed in a single key press. If
69
buttons to change the
Page 64
- Issue 02b (05 March 2014)