Table of Contents
Advertisement
Setting-Up
Selecting output direction (printed side up or down)
The face-up tray, as explained earlier in this section is a useful tool for
printing on thick paper or envelopes printed side up. The factory
default for the output tray however, is the face-down tray (printed side
down). In this mode, the output tray receives the printed documents in
order.
This setting is controlled by a switch which is located on the right side
of the printer toward the rear (see illustration).
1.
When the switch is flush with the top of the printer, prints are
output printed side down (factory default).
2.
When the switch is pressed in, prints are output printed side up.
Face-down tray
2-12
Face-up tray
Face-down tray
Face-up tray
Advertisement
Table of Contents
