Table of Contents
Advertisement
Setting-Up
See the separate Quick Guide for Installation and Reference that
comes packaged with the printer before unpacking.
Set-up the printer according to the following instructions.
Note
• Always use a shielded interface cable. Use of an unshielded cable can
result in radio interference with data.
• Keep all the boxes and packing materials that the printer comes in for
later use when transporting the printer.
Installing the Face-Down Tray
Install the face-down tray by aligning its tabs into the position holders
located on the upper portion of the printer.
Installing Tray1
1.
Using the left and right slots in the printer as guides, gently push
Tray1 until it cannot be inserted any further.
Setting-Up
2-7
Advertisement
Table of Contents
