Using The Status Display - Minolta PAGEWORKS 8E User Manual

DOS Printing Utilities

Using the Status Display

This section describes how to display the Status Display and make
changes in the operating environment of the Status Display.
To display the Status Display
After the Status Display is loaded, perform the required hot key
combination (a combination of keys you press at the same time to
perform an operation) to display the Status Display. The following is
the default hot key combination.
[ctl]+[alt]+[R]
After the Status Display screen is displayed, you can change the hot
key combination.
To select an item on the Status Display, first highlight it, then press
Return to advance to its setting screen. You can clear the Status
Display at any time by pressing .
Esc
The following is a brief explanation of the items that are available on
the Status Display. Further information can be found in the Status
Display's online help.
4-103