Table of Contents
Advertisement
7.
Replace the side cover using the two screws provided to secure it
in place.
8.
Print a self-test page (page 2-19) and check to confirm that the
"Total Memory" item correctly shows the increase in memory
capacity. If it does not, repeat the above steps making sure that
the SIMM is installed correctly.
Note
• To remove the SIMM from the main
circuit, press down on the metal taps
on each side of the socket to release
the SIMM.
• Once the SIMM has been installed,
be sure to reset the Printer Memory
Setting to reflect the new memory
capacity.
Options
2-23
Advertisement
Table of Contents
