Table of Contents
Advertisement
Installing NEC 1765 Administration Software
for TCP/IP in Windows 3.1x
Follow these steps to install NEC 1765 Administration
software for TCP/IP using the installer program
provided on the NEC 1765 software for NetWare
diskette.
1.
Boot your system and start Windows.
2.
Insert the NEC 1765 software for TCP/IP diskette
into the floppy drive (this example uses drive a:).
3.
In the Windows Program Manager, select Run from
the File menu. Windows displays the Run dialog
box.
4.
Type
a:\setup.exe
in the Command Line field.
5.
Click the OK button. This launches the installer
program. The installer starts up, and the Welcome
screen opens. Click the Setup button (A).
6.
In the Select Utilities screen, select NEC Printer
Administration. Make sure the checkbox in front of
NEC Printer Client Access is blank. Click the
Continue button (B).
7.
The Select Destination Path screen defines the
directory for the new software. Click Continue (C).
8.
The Installer begins copying the files (D). The
software will be copied into a directory named
c:\NEC1765\TCPIP.
9.
When the installation is complete, click the OK
button in the Exit Setup window to close the
installer (E).
10. Restart Windows to complete the software
installation.
11. Run NEC 1765 Administration software for TCP/IP
by opening the Program Manager. The NEC 1765
Administration software icon is located in the NEC
Printer Utility - TCP/IP program group (F).
3–12
1765 Network Printer Configuration Guide
Installing NEC 1765 Administration Software
for TCP/IP in Windows 95
Follow these steps to install NEC 1765 Administration
software for TCP/IP using the installer program
provided on the NEC 1765 software for NetWare
diskette.
1.
Boot your system and start Windows.
2.
Insert the NEC 1765 software for TCP/IP diskette
into the floppy drive (this example uses drive a:).
3.
In Windows, select Run from the Start menu.
Windows displays the Run dialog box.
4.
Make sure
a:\setup.exe
appears in the Command Line field.
5.
Click the OK button. This launches the installer
program. The installer starts up, and the Welcome
screen opens. Click the Setup button (A).
6.
In the Select Utilities screen, select NEC Printer
Administration. Make sure the checkbox in front of
NEC Printer Client Access is blank. Click the
Continue button (B).
7.
The Select Destination Path screen defines the
directory for the new software. Click the Continue
button (C).
8.
The Installer begins copying the files (D). The
software will be copied into a directory named
c:\NEC1765\TCPIP.
9.
When the installation is complete, click the OK
button in the Exit Setup window to close the
installer (E).
10. Restart Windows to complete the software
installation.
11. Run NEC 1765 Administration software for TCP/IP
by opening the Programs submenu from the Start
menu. NEC 1765 Administration software is located
in the NEC Printer Utility - TCP/IP program
group (F).
Advertisement
Table of Contents
