Table of Contents
Advertisement
Changing NetWare File Server Scanning
You may choose whether NEC 1765 software will scan
for file servers.
1.
Select the printer you want to change from the list of
printers in the Printer Administration window.
2.
From the Printer Administration window click the
NetWare button or select the NetWare menu option
from the Configure menu.
3.
Click the Scan for File Servers check box.
4.
Select the Save button to save the new setting and
leave the NetWare Configuration dialog box
Or
Select the Cancel button to keep the old setting and
leave the NetWare Configuration dialog box.
5–32
1765 Network Printer Configuration Guide
Changing NetWare File Server Scan Interval
If NEC 1765 Administration software is scanning for file
servers, you can change the scan interval. The scan
interval is measured in minutes and you can choose an
interval between 0 and 255 minutes. The default is 5
minutes. If you have specified a limited file server or
Scan for File Servers is turned off, the scan interval will
be set to 0.
1.
Select the printer you want to change from the list of
printers in the Printer Administration window.
2.
From the Printer Administration window click the
NetWare button or select the NetWare menu option
from the Configure menu.
3.
Type the new scan interval in the Scan Interval text
box.
4.
Select the Save button to save the new scan interval
and leave the NetWare Configuration dialog box
Or
Select the Cancel button to keep the old scan
interval and leave the NetWare Configuration
dialog box.
Advertisement
Table of Contents
