Scaling; Print To File - NEC SILENTWRITER SUPERSCRIPT 660 User Manual

3–12 Printing with Your SuperScript 660

Scaling

Print to File

NOTE: If an error occurs during duplex printing,
please recover as follows:
• If an error (e.g. paper jam) occurs while printing
the front side of the page (odd-numbered pages),
clear the error as instructed in Print Status
Window and click the Resume button to continue
the current duplex job.
• If an error occurs while printing the back side of
the page (i.e. even-numbered pages), clear the
error as instructed in Print Status Window. If the
page being printed when the error occurs is
damaged insert a new piece of paper in the
printer. Click the Resume button to continue the
print job.
After all pages are finished, reprint the missing
(damaged), odd-numbered page on the reverse
side of the corresponding page. Then you will
have a complete, double-sided document.
Sets the percent value to scale the print job. The
default value is 100. The range is 10% to 200%, and
depending on the application this may also affect the
margins
Selecting this item will result in the print job being
printed to a GDI file specified in the File Name.
File Name
Allows the user to enter the file name and direc-
tory to save print job to. The default file name
and directory is C:\SSCRIPT\DEFAULT.GDI.
Browse Button
Selecting the Browse button opens a window
which allows the user to select the file name,
drive, and directory of choice for the print job.