Transferring Event Information To A Syslog Server - NEC NEAX IPS NWA-008869-001 Installation Manual

Transferring event information to a syslog server

You can transfer the event information specified with the logging command to a syslog server.
To set up transfer to a syslog server, use the syslog command in global config mode. Set the IP address of
the syslog packet source (address of the interface to be connected to the syslog server) and the IP address
of the syslog server.
In this example, "192.168.47.100" is set as the address of the syslog server.
Router (config) # syslog host 192.168.47.100
Router (config) #
CHAPTER 6 MANAGEMENT AND MAINTENANCE
SETTING UP EVENT INFORMATION COLLECTION
Enter
– 150 –
NWA-008869-001 Rev.1.0
atch6001.fm