Zelmer ZKS18000 User Manual page 116

Nutritional value is corrected as you add more
products.
4 Press , to change the current food code of the
weighted product, then enter the new code.
5 Remove the weighted product from the weighing plate.
6 Press to clear the product code.
7 Follow the above procedure to check the nutritional
value of the other products.
STORING NUTRITIONAL VALUES IN MEMORY
1 Place the product on the scale.
2 Enter the food code of the weighted product
3 Press the , button to store the selected nutritional
value of the first of the weighed products.
4 Remove the weighted product from the weighing plate.
5 Press to clear the product code.
6 Place another product on the weighing plate.
7 Enter the food code of the weighted product.
8 Press the , again to add the nutritional value of the
second product.
9 Remove the weighted product from the weighing plate.
10 In order to add next nutritional values of products pro-
ceed as above.
11 Press the , button to see the total nutritional value of
all stored products.
The appliance can memorize up to 99 nutri-
tional values.
116
VIEWING VALUES STORED IN MEMORY
Every time you turn the scale off, the stored nutritional values
are saved in the memory of the applianc
When you turn the scale on back again, you can view the
values stored last.
1 Press the
2 Wait for the display to show the " " value.
3 Press the , button to see the total nutritional value of
all stored products.
4 Press button to return to the weighing mode.
DELETING VALUES FROM MEMORY
1 Set weighing mode.
2 Make sure that the food code display indicates 000.
3 Press and hold for 2 seconds.
4 The "M" symbol flashes on the display.
5 Press again to clear the memory.
6 Press any button to save the value in memory.
CHANGING PRODUCT CODE
1 Find the code of the weighed product on the product list
attached to this manual.
2 Enter a 3-digit product code from the numerical key-
board.
3 Press , to change the entered product code. Then
enter a new value.
SELECTING WEIGHT UNITS
The appliance is equipped with a weight unit selection func-
tion.
The weight unit may be changed when the " ", value is
shown on the display, as well as after the weighing is done.
In order to change the unit press the
ously until the desired unit is displayed.
, button to turn the appliance on.
button continu-
ZKS18000-001_v02