Function Description - Zelmer ZKS18000 User Manual

BUTTONS – SYMBOL LABELS
Function buttons
On/Off
●
Scale reset – tare
●
Change of scale unit during weighing.
●
Clear product code
●
Clear memory
●
Add nutritional value for the current
●
product in the memory. The appliance
can store 99 values
Check the total nutritional value of all
●
stored products
Numerical buttons
Enter product code
●
WORK MODE
Weighing
Display the product nutritional value
Storing nutritional values
Display the total nutritional value of all stored products
ZKS18000-001_v02
Clear the total nutritional value of all stored products
Operating and using the scale
BEFORE FIRST USE
1 Unpack the scale.
2 Insert the right type of batteries into the battery compart-
ment (6) (see "REPLACING BATTERIES").
INSTRUCTIONS FOR USE
1 Place the scale on a hard, flat surface. Do not use the
appliance on a carpet, or on flexible surfaces.
Do not put anything on the weighing plate
before turning on the scales.
2 Press the
3 Wait for the display to show the " " value.
When you turn on the appliance, the WT symbol
is shown in the lower left corner of the display
indicating that weighing mode is enabled.
4 Select a desired weight unit (see "SELECTING WEIGHT
UNIT").
5 Place the product in the centre of the weighing plate.
6 The display shows the weight of the product in the
selected measurement unit.
7 Remove the weighted product from the weighing plate.
8 When done press and hold the
2 seconds to turn off the scales..

Function Description

NUTRITIONAL VALUES
1 Place the product on the scale.
2 Enter the food code for the weighted product from the list
of food codes enclosed with these instructions.
3 The display shows the weight and individual product
nutritional value.
, button to turn the appliance on
button for
115