Table of Contents
Advertisement
THE SETUP HOSTS TAB
The Setup Hosts tab lets you add new hosts and manage current hosts.
1. To view the Setup Hosts tab, click Objects > Setup Hosts.
MAC Based Management / IP Based Management
After DFL-M510 connects into your network, the DFL-M510 can automatically learn
host information according to MAC or IP address information. In general circumstance,
MAC Based Management is enough to fulfill the deployment environment where a
switch is attached to the LAN port of your DFL-M510. However, if there is a router
attached to your LAN port, the DFL-M510 will recognize the router mac address only, it
cannot recognize the hosts automatically behind the routers, thus the IP Based
Management mode is required in order to have your DFL-M510 correctly recognize
the hosts behind your router.
Host Table
No.
State
Host/IP Address
MAC
67
Shows the current number of hosts
Shows the status for each host (refer to color legend at the bottom of
the screen)
Shows the host IP address
Shows the host MAC address
Advertisement
Table of Contents
