Set Command; Set System" Command - D-Link DFL-M510 User Manual

(C) get state
>> get state
Operation mode: In-Line
(D) get interface
>> get interface
Interface:
WAN: auto.
LAN: auto.

Set Command

Use this command to set the system's parameter.
Main Sub
command command
system
time
set
state
remote
interface

"SET SYSTEM" COMMAND

nd
Prefix 2
command command
set system ip
mask
gateway
passwd
detect
120
Command description
Set system configurations, including IP, password and etc.
Set device clock
Set device operation mode
Set remote control mode
Set interface link mode
Example
set system ip
192.168.80.244
set system mask
255.255.0.0
set system gateway
192.168.80.244
set system passwd
set system detect
Command description
Set device's IP
Set device's mask
Set device's default gateway
Set administrator's new
password
Set the relating arguments for
ISG's outgoing and incoming
packets detection.