Set State" Command - D-Link DFL-M510 User Manual

Change time successfully !
Current time : (GMT + 0) Mon Apr 18 10:57:43 2005
DST time : (GMT + 0) Mon Apr 18 10:57:43 2005
System duration: 0 days 1:9:1

"SET STATE" COMMAND

nd
2
Prefix
command
inline
Monitor
set state
Bypass
Span
EXAMPLE
(A) set state inline
>> set state inline
Set system state to In-Line mode.
(B) set state monitor
>> set state monitor
Set system state to MONITOR mode.
(C) set state bypass
>> set state bypass
Set system state to BYPASS mode.
(D) set state span
>> set state span
Set system state to SPAN mode.
125
Example
Set state inline
Set state monitor
Set state bypass
Set state span
Command description
Set ISG to execute normally based on its
configured policy
ISG only inspects and keep logs does not
drop packets or disconnects on its own
accord
ISG will transmit all received packets to
work on another port unconditionally,
which can be regarded as bridge mode.
ISG accept packets mirrored from hub or
switch mirror port and is able to reset
network connection; two connection ports
of ISG work at this time.