Table of Contents
Advertisement
CHAPTER 1: GETTING STARTED WITH THE DFL-M510
The DFL-M5 10 is a transparent network device. To ensure there is no disruption to your
network, it can be installed in In-Line mode with a hardware bypass function enabled.
The hardware bypass ensures that if the DFL-M510 crashes, or experiences a power out
or some other problem; your network is still up and running. This allows your network
administrator to begin monitoring selected PCs, while checking for anything that may
upset your current network environment. Refer to the Quick Installation Guide for
instructions on connecting the DFL-M510 to your network. This section covers the
following topics:
"Identifying Components" on page 1
"Configuring the DFL-M51 0 " on page 3
"Running the Setup Wizard" on page 9
Before using this manual, take a look at the copyright, trademark, and
safety information section. See
IDENTIFYING COMPONENTS
The following illustrations show the front and rear of the DFL-M510.
FRONT VIEW
LCM BUTTON DESCRIPTION
The LCM buttons are described below.
Button Name
Up
Down
ESC
Enter
1
Description
Scroll Up
Scroll Down
Go back to the previous screen
Next screen
"
Before you Begin
"
on page i.
Advertisement
Table of Contents
