Download
Share
Print this page
D-Link DG-104S User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Gateway
  5. DG-104S
  6. User manual

D-Link DG-104S User Manual

Voip station gateway
Hide thumbs Also See for DG-104S:

Advertisement

Quick Links

Download this manual See also: Manual


 
 



















 
6DG104S...02
Printed in Taiwan
RECYCLABLE

Advertisement

loading

Related Manuals for D-Link DG-104S

Summary of Contents for D-Link DG-104S

  • Page 1        6DG104S...02 Printed in Taiwan RECYCLABLE...
  • Page 2 Registration Card. If a Registration Card for the product in question has not been returned to a D-Link office, then a proof of purchase (such as a copy of the dated purchase invoice) must be provided when requesting warranty service.
  • Page 3 LIGHTNING OR OTHER HAZARD.   IN NO EVENT WILL D-LINK BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOSS OF PROFITS, COST OF COVER OR OTHER INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING OUT THE INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE OR INTERRUPTION OF A D- LINK PRODUCT, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY.
  • Page 5                                                                                                 !   !
  • Page 6         '  -.     '  -    ...
  • Page 7 The D-Link DG-104S VoIP Station Gateway links traditional telephony networks to IP networks with conventional telephony devices such as analog phones or fax machines. The DG-104S includes four loop start Foreign Exchange Subscriber (FXS) interfaces with normal RJ-11 telephone connectors that provide voice/fax communication over the IP network, and it also provide two 10/100 Mbps dual speed Ethernet ports.
  • Page 8 ♦ One DG-104S VoIP Gateway ♦ A/C Power Adapter If any item is found missing or damaged, please contact your local reseller or D-Link directly at one of the offices listed at the rear of the manual for replacement.   !"#$# This section identifies all the major external components of the device.
  • Page 9 (not a crossover cable) with RJ-45 connectors at each end. Make the network connection by plugging one end of the cable into the RJ-45 jack of the DG-104S, and the other end into a port on your WAN router.
  • Page 10 DG-104S VoIP Station Gateway      Once the device has been connected to a PC, you will need a separate IP address and a straight cable.      To connect the device to either a hub or switch, you must connect the straight cable to the Uplink port.
  • Page 11 DG-104S VoIP Station Gateway       Before configuring your VoIP Gateway, take a few minutes to look over this section and familiarize yourself with the front panel LED indicators depicted below. ♦ Power This LED is lit when the device is receiving power; otherwise, it is unlit.
  • Page 12 DG-104S VoIP Station Gateway     In order to use the DG-104S VoIP gateway, you must first configure it. #&)#%*'  There are two ways to configure the VoIP gateway, both of which are discussed below. They are: ♦ Using a terminal or PC running terminal emulation software connected to the diagnostic port via an RS-232 cable.
  • Page 13 DG-104S VoIP Station Gateway           Once you have set an IP address for your device, you can use a Telnet program (in a VT-100 compatible terminal mode) to access and configure it. Most of the screens are identical, whether accessed from the console port or from a Telnet interface.
  • Page 14 DG-104S VoIP Station Gateway        If the boot up process has proceeded too far and you did not reach the Boot Menu shown above, unplug the device, plug it back in (to restart the boot up process), and press <Ctrl+C> until the Boot Menu appears.
  • Page 15 DG-104S VoIP Station Gateway        ♦ Notify Entity Enter the appropriate information for you call agent into this field. ♦ Residential GW This is the name your VoIP gateway will be known as by the call agent. It usually consists of the IP address or a normal name.
  • Page 16 DG-104S VoIP Station Gateway          In order to use a web browser to configure the VoIP gateway, you must make sure it has a valid Ethernet connection to a PC or LAN via its LAN or WAN ports. The VoIP gateway comes with a default IP address of 10.1.10.4. You must make sure the PC is in the same IP domain as the VoIP gateway.
  • Page 17 DG-104S VoIP Station Gateway     !     "     Click on the Login to the web-based management module button in the middle of the window. The following window will be displayed: Initially, the VoIP gateway does not have a Username or Password. To log in, simply click on the OK button.
  • Page 18 DG-104S VoIP Station Gateway #  !  !...
  • Page 19 DG-104S VoIP Station Gateway To begin configuring the device, click on the Config IP folder on the left-hand side of the window (shown below). Next, click on Config Device IP Address. The following window will appear:...
  • Page 20 DG-104S VoIP Station Gateway #$ !  ! The items on this window are described below: Restart Settings ♦ Get IP From Choose the method the VoIP gateway will use to obtain its IP settings once it is rebooted (restarted). Choices include: Manual – When Manual is chosen, the VoIP gateway will obtain its IP settings from the fields located just below.
  • Page 21 DG-104S VoIP Station Gateway PPPoE Settings (for DSL users) ♦ State Enables or disables the PPPoE function. ♦ User Name Enter the User Name for the PPPoE function. ♦ Password Enter the Password for the PPPoE function. Click on the Save button at the bottom right of the screen to save the settings.
  • Page 22 DG-104S VoIP Station Gateway      The DG-104S VoIP gateway features a Boot Menu, which is described in this chapter. To access the Boot Menu, you must first make sure the console is connected to the Diagnostics port (an RS-232 port with a 9-socket D-shell connector and DCE-type wiring) and the appropriate cabling for the connection is being used.
  • Page 23 DG-104S VoIP Station Gateway              "" !& ♦ Notify Entity Enter the appropriate information for you call agent into this field. ♦ Residential GW This is the name your VoIP gateway will be known as by the call agent. It usually consists of the IP address or a normal name.
  • Page 24 IP Enter the IP address of the trap manager.     This screen displays various types of information about the DG-104S as well as allowing you to enter information pertaining to name, location, and how to reach the person responsible for maintaining the device.
  • Page 25 DG-104S VoIP Station Gateway   #            "" !& ♦ Device Type This displays the model name of this device. ♦ MAC Address This displays the MAC address of this device. ♦ Serial Number This displays the serial number of this device. ♦...
  • Page 26 DG-104S VoIP Station Gateway   (!       After making your changes in the fields above, press RESET DEVICE TO START UPDATE to initiate the update sequence.          "" !& ♦ Software Update Mode This specifies downloading the image file through a WAN Link. ♦...
  • Page 27 DG-104S VoIP Station Gateway         After the settings have been saved to NV-RAM, they will become the default settings for the device, and they will be used every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which will clear all settings and restore them to their initial values, which were present when the device was purchased.
  • Page 28 DG-104S VoIP Station Gateway    )*    $    To perform a system reset, use the arrow keys to highlight the last menu item on the Boot Menu, Restart System, and press <Enter>. The following Reboot Device screen will be briefly displayed:   * )   ...
  • Page 29      ## The DG-104S VoIP gateway offers an embedded Web-based (hypertext) interface allowing users to manage the device from anywhere on the network through a standard browser such as Netscape Navigator/Communicator, 4.x or later, or Microsoft Internet Explorer, 4.x or later. The Web browser acts as a universal access tool and can communicate directly with the device using HTTP protocol.
  • Page 30 DG-104S VoIP Station Gateway  #!!  #$ !  ! The items on this window are described below: Restart Settings ♦ Get IP From Choose the method the VoIP gateway will use to obtain its IP settings once it is rebooted (restarted). Choices include: Manual –...
  • Page 31 DG-104S VoIP Station Gateway PPPoE Settings (for DSL users) ♦ State Enables or disables the PPPoE function. ♦ User Name Enter the User Name for the PPPoE function. ♦ Password Enter the Password for the PPPoE function. Click on the Save button at the bottom right of the window to save the settings.
  • Page 32 DG-104S VoIP Station Gateway     #  !  ! The items on this window are described below: ♦ Device Type This displays the model name of this device. ♦ MAC Address This displays the MAC address of this device. ♦ Boot PROM Version This displays the version number of the device’s startup code.
  • Page 33 DG-104S VoIP Station Gateway        )  !  ! Enter the desired information on the window above and then click Save.
  • Page 34 DG-104S VoIP Station Gateway  #  #) $   !  ! Enter the desired information on the window above and then click Save.
  • Page 35 DG-104S VoIP Station Gateway  #   $   !  ! +    !  !"        !  !&...
  • Page 36 DG-104S VoIP Station Gateway  $   !  ! Enter the desired information on the window above and then click Save.
  • Page 37 DG-104S VoIP Station Gateway #    '$  !  ! After entering the desired information on the window above, enable or disable the NAT Function and then click Save.
  • Page 38 DG-104S VoIP Station Gateway %       ,   !  !  !  ! ! )  !        - +    !  !"         !  !&...
  • Page 39 DG-104S VoIP Station Gateway  ,   !  ! After completing the local server configuration settings on the window above, select enabled or disabled in the drop-down menu under State and then click Save.
  • Page 40 DG-104S VoIP Station Gateway      '  !  ! The items on this window are described below: ♦ Trap Manager IP Address The IP address of the trap receiving station. ♦ Community Name A user-defined SNMP community name. ♦ SNMP AuthTrap Enable or disable the SNMP trap.
  • Page 41 DG-104S VoIP Station Gateway #!      $     !  ! To add or change a User Account, fill in the appropriate information in the User Name, Old Password (if applicable), New Password, and Confirm New Password fields. Click on the Save button to keep the settings.
  • Page 42 DG-104S VoIP Station Gateway &       !  ! Items in the window are described as follows: ♦ Rx Packets The total number of packets received by the device. ♦ Rx Bytes The total number of bytes contained in packets received by the device.
  • Page 43 DG-104S VoIP Station Gateway ♦ Tx Bytes The total number of bytes transmitted by the device. ♦ Tx Non Ucast Packets The number of non-unicast packets sent. ♦ Tx Discard Packets The number of packets dropped by the device. ♦ Tx Heartbeat Errors The number of heartbeat errors. This relates to an internal timing function.
  • Page 44 DG-104S VoIP Station Gateway !      !  ! This read-only window displays a variety of Tcid configuration settings.
  • Page 45 DG-104S VoIP Station Gateway !    !  ! This read-only window displays various Coding Profile settings.
  • Page 46 DG-104S VoIP Station Gateway '     .   !  ! This read-only window displays settings related to xCGP Configuration.
  • Page 47 DG-104S VoIP Station Gateway   !    !  (!    !  ! The items on this window are described below: ♦ Software Update Mode This specifies downloading the image file through a WAN Link. ♦ TFTP Server Address The IP address of the TFTP server where the runtime or configuration file is located.
  • Page 48 DG-104S VoIP Station Gateway         !  ! After the settings have been saved to NV-RAM, they will become the default settings for the device, and they will be used every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which will clear all settings and restore them to their initial values, which were present when the device was purchased.
  • Page 49 DG-104S VoIP Station Gateway   $   )*  # /!  ! Before performing a Factory Reset, be absolutely certain that this is what you want to do. Once the reset is done, all of the device’s settings stored in NV-RAM will be erased and restored to values present when the device was purchased.
  • Page 50 DG-104S VoIP Station Gateway $    * ) !  ! To perform a reboot of the device, which resets the system, click the Restart button.
  • Page 51 DG-104S VoIP Station Gateway       The DG-104S VoIP gateway offers a line-at-a-time prompt and response scheme to execute various configuration instructions. The interface displays a single prompt character ggdbg> when it is ready to accept a command (ex. ggdbg>set or ggdbg>show).
  • Page 52 DG-104S VoIP Station Gateway nwdbg dtmf_relay <0|1> Definition: This command turns the Dual Tone Multiple Frequency (DTMF) relay function on or off, or shows the DTMF relay state if only nwdbg dtmf_relay is typed. Parameter(s): <0 : off, 1 : on>...
  • Page 53 DG-104S VoIP Station Gateway If only nwdbg ca is typed, this command shows the address. Parameter(s): <NOTIFY ENTITY, the format can be: localName@[domainName|ip]:port or [domainName|ip]:port or [domainName|ip]> Example: nwdbg ca 10.1.40.100:2427 nwdbg rgw <RGW NAME> Definition: This command sets the Residential Gateway Name.
  • Page 54 DG-104S VoIP Station Gateway if <FILENMAE> is not specified, the image file name in EEPROM will be employed. tftp update – update the image in flash Current Settings : TFTP Server IP Address : 172.16.6.245 Image File Name : 104nmm01.tfp tftp srvip <IP ADDRESS>...
  • Page 55 DG-104S VoIP Station Gateway                             !"# $ %& '!%#() # *(*+! ,(-%# .%/ % #0+(01    2 332 4(445 . "! &./  & '6 66  332 4(445 . "! &./  & '6 " 6...1445 . ./ %- # % 6...14445 . "! &./ %- #    *#%& 7#%#& # ##87 /   $$#%   ** ** #('- # ! ,9  % &1      (6:' 96! 3;...
  • Page 56 DG-104S VoIP Station Gateway -##& #7 && / )/ & 2= 3 "#  $    &  2 34(44#<( %  34(44#<( % %& ;<(9#)#) #    4 2,0 ',??+ ;--  '   @4(445 . "! &./   2 3 @4(445 . "! &./    3 !   & !"9A  & @9 '5 &       '      7# '6*'(  ( ) ...
  • Page 57 TEL: 39-02-2900-0676 FAX: 39-02-2900-1723 URL: www.dlink.it E-MAIL: info@dlink.it JAPAN D-LINK TOKYO 10F, 8-8-15 Nishi-Gotanda, Shinagawa-ku, Tokyo 141 Japan TEL: 81-3-5434-9678 FAX: 81-3-5434-9868 URL: www.d-link.co.jp E-MAIL: kida@d-link.co.jp SINGAPORE D-LINK INTERNATIONAL/D-LINK SINGAPORE 1 International Business Park, #03-12 The Synergy, Singapore 609917 TEL : 65-774-6233 FAX: 65-774-6322 E-MAIL: info@dlink.com.sg URL: www.dlink-intl.com...
  • Page 58 #                               ! "    #  Product Product Serial * Product installed in type of * Product installed Computer serial Model computer (e.g., Compaq 486)            $          $                  !! ! ! !!              !!!!!!!        ! "   ! !"! !"!#$%!%& ''''''''''''''''''''''''''''' #    !    ! "  ...