Table of Contents
Advertisement
Getting Started
Once you have accessed the Command Line Interface (CLI) with a terminal
connection, press any key and the following prompt will appear. Enter the user name
and password: the default user name is admin, the default password is admin.
Welcome to D-Link DFL-M510 Console Environment
Copyright (C) 2005 D-Link Corp. <www.dlink.com>
DFL-M510 login:
CLI Command List
You can use the console or SSH to connect the DFL-M510. After login, you can use
the CLI commands to configure the DFL-M510. The complete CLI commands are
described as follows.
Commands Description
help
Getting information of all command's usage and argument configuration
get
Display all kinds of configuration information of the DFL-M510
set
Set the system parameter
history
Display all commands which you have used
exit
Exit command shell
reboot
Reboot system
Reset system configuration to default settings, type "y" to load default
reset
setting.
ping
Send ICMP echo request messages
116
Advertisement
Table of Contents
