Step 5: Making Setting Adjustments Before Recording; The Viewfinder - Sony HVR-HD1000J Service Manual

Step 5: Making setting adjustments before
recording
The LCD panel
Open the LCD panel (1), then rotate it to
the best angle to record or play (2).
180 degrees
2
(max.)
1
180 degrees
(max.)
To turn off the LCD screen
Set the LCD ON/OFF switch to OFF. This
helps to make the battery last longer. The
recorded picture will not be affected by the
setting. To turn on the LCD screen, set the
LCD ON/OFF switch to ON.
b Notes
• When the LCD ON/OFF switch is set to OFF,
you cannot operate the touch panel.
z Tips
• If you rotate the LCD panel 180 degrees to the
lens side, you can close the LCD panel with the
LCD screen facing out. This is convenient
during playback operations.
• See [LCD/VF SET] - [LCD BRIGHT] (p. 61) to
adjust the brightness of the LCD screen.
• Press DISPLAY/BATT INFO to toggle the
screen indicators (such as Battery Info) on or
off.

The viewfinder

Pull out the LCD panel block to adjust the
position (1), and rotate the viewfinder to
the best angle (2).
You can view pictures using the viewfinder
90 degrees
to avoid wearing down the battery, or when
(max.)
the picture seen on the LCD screen is poor.
Viewfinder lens
adjustment lever
Move it until the
picture is clear.
z Tips
• You can adjust the brightness of the viewfinder
backlight by selecting [LCD/VF SET] - [VF
B.LIGHT] (p. 61).
The shoulder pad
You can adjust the position of the shoulder
pad by loosen the screws illustrated below.
Tighten the screws again after adjustment.
2
1
Screws
25