Sony HVR-HD1000J Service Manual page 233

3-12. S Positioning
1. Removal procedure
1) Remove the tension coil spring (SB) 1 from the hook of the S
positioning 2.
2) Rotate the S positioning in the direction of the arrow A, and
remove the claw 3 and disengage the dowel.
3) Remove the claw 4 and remove the S positioning 5.
1 Extension spring
(SB)
2 Hook of the S positioning
S positioning
Dowel
HVR-HD1000J/HD1000U/HD1000N/HD1000E/HD1000P/HD1000C
Claw 4
A
Claw 3
2. Attachment procedure
1) Insert the claw 4 of the S positioning 5 in the hole of the LS
chassis.
2) Engage the claw 3 and the dowel.
3) Insert the tension coil spring (SB) 1 into the hook of the S
positioning 2.
Key Points in Re-assembling
S positioning
5 S positioning
6-85
S brake block ass'y
Extension spring (SB)
(Be careful not to elongate the spring hook.)