Sony HVR-HD1000J Service Manual page 361

STANDARD SET menu (Continued)
DATA CODE
During playback, displays the information
(data code) recorded automatically at the
time of recording.
B OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
60min
A SteadyShot off
B Exposure
C White balance
D Gain
E Shutter speed
F Aperture value
b Notes
• The exposure adjustment value (0EV), a shutter
speed, and the aperture value appear when still
images on a "Memory Stick Duo" are played back.
• In the DATE/TIME data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [-- --
----] and [--:--:--] will appear.
REMAINING
B AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or TAPE with a cassette inserted.
• When you touch
ON
64
1
0:00:00:00
60min
2
AUTO 3
100 AWB
F1. 8 9dB
P-MENU
6 5 4
(Play/Pause).
Always displays the remaining tape
indicator.
REC LAMP (Recording lamp)
The camera recording lamp will not light up
during recording when you set this to [OFF]
(The default setting is [ON]).
BEEP
B ON
A beeping sound starts when you start/stop
recording, or operate the touch panel.
OFF
Cancels the beeping sound and shutter
sound.
DISP OUTPUT (Display output)
B LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
MENU ROTATE
B NORMAL
Scrolls the menu items downwards by
touching .
OPPOSITE
Scrolls the menu items upwards by
touching .
CALIBRATION
See page 102.
QUICK REC (Quick recording)
You can slightly reduce the recording start
point time when you start recording by