Sony HVR-HD1000J Service Manual page 357

STANDARD SET menu (Continued)
able to recognize the video signal from your
camcorder.
• When [AUTO] is selected, if the signal switches
between HDV and DV formats, the picture and
sound are interrupted temporarily.
• When [i.LINK CONV] is set to
[ON:SQUEEZE]/[ON:EDGE CROP], pictures
are output as follows:
– at [AUTO], an HDV signal is converted to the
DV format and output; a DV signal is output
as it is.
– at [HDV], an HDV signal is converted to the
DV format and output; a DV signal is not
output.
– at [DV], a DV signal is output as it is; an
HDV signal is not output.
REC FORMAT
You can select a recording format.
B HDV1080i (
Records in the HDV1080i specification.
DV ( )
Records in the DV format.
b Notes
• If you output the recording picture using an
i.LINK cable, set [i.LINK CONV] accordingly.
DV SET
The following functions are available when
recording in DV format.
REC MODE (Recording mode)
x
B SP (SP)
Records in the SP (Standard Play) mode on
a cassette.
LP (LP)
Increases the recording time to 1.5 times
the SP mode (Long Play).
60
)
b Notes
• If you record in the LP mode, pictures may
appear mosaic-like or sound may be interrupted
when you play back the tape on other
camcorders or VCRs.
• When you mix recordings in the SP mode and in
the LP mode on one tape, the playback picture
may be distorted or the time code may not be
written properly between the scenes.
WIDE SELECT
x
You can select the aspect ratio according
to the TV connected when recording. Refer
also to the instruction manuals supplied
with your TV.
B 16:9 WIDE
Records pictures in the full screen for a
16:9 (wide) TV screen.
4:3 ( )
Records pictures in the full screen for a 4:3
TV screen.
b Notes
• Set [VIDEO OUT] correctly according to the
TV connected for playback.
AUDIO MODE
x
B 12BIT
Records in the 12-bit mode (2 stereo
sounds).
16BIT ( )
Records in the 16-bit mode (1 stereo sound
with high quality).
b Notes
• When recording in the HDV format, sound is
automatically recorded in [16BIT] mode.
x AUDIO MIX
During tape playback, you can monitor the
sound recorded by other camcorders using
audio dubbing or 4ch microphone
recording.