Sony HVR-HD1000J Service Manual page 293

15. Record of Use Check (3)
Page 7
Note 1: This data will not be erased (reset) when the lithium 3 V
power supply (MS-379 board BT901) is removed.
Note 2: Check that the data of page: 0, address 10 is "00".
Address
C8 User initial power
C9 on date
CA (BCD code)
CB Final condensation
CC occurrence date
CD (BCD code)
Using method:
1) The record of use data is displayed at page: 7, addresses: C8 to
CD.
16. Record of Self-diagnosis Check
Page 7
Note 1: This data will not be erased (reset) when the lithium 3 V
power supply (MS-379 board BT901) is removed.
Note 2: Check that the data of page: 0, address 10 is "00".
Address
B0 "Repaired by" code (Occurred 1st time) *1
B1 "Block function" code (Occurred 1st time)
B2 "Detailed" code (Occurred 1st time)
B4 "Repaired by" code (Occurred 2nd time) *1
B5 "Block function" code (Occurred 2nd time)
B6 "Detailed" code (Occurred 2nd time)
B8 "Repaired by" code (Occurred 3rd time) *1
B9 "Block function" code (Occurred 3rd time)
BA "Detailed" code (Occurred 3rd time)
BC "Repaired by" code (Occurred 4th time) *1
BD "Block function" code (Occurred 4th time)
BE "Detailed" code (Occurred 4th time)
C0 "Repaired by" code (Occurred 5th time) *1
C1 "Block function" code (Occurred 5th time)
C2 "Detailed" code (Occurred 5th time)
C4 "Repaired by" code (Occurred the last time) *1
C5 "Block function" code (Occurred the last time)
C6 "Detailed" code (Occurred the last time)
*1 : "01" t "C", "03" t "E"
Using method:
1) The past self-diagnosis codes are displayed at page: 7, address:
BC to C6. Refer to "1-5. SELF-DIAGNOSIS FUNCTION"
for detail of the self-diagnosis code.
HVR-HD1000J/HD1000U/HD1000N/HD1000E/HD1000P/HD1000C
Address C8 to CD
Function
Year
Month After setting the clock, set the date of power on next
Day
Year
Month
Day
Address B0 to C6
Self-diagnosis code
Remarks
Initializing method:
Order Page Address Data
1 7 01
2 7 00
3 7 B0 to C6
4 7 00
5 7 01
6-139
Procedure
C0
01 Press PAUSE (Write) button.
Check that the data is "00".
00
00