Toshiba MMU-AP0072H2UL Service Manual page 136

9-4. High Wall Type
No. Part name
Front panel 1) Stop operation of the air conditioner and
2) Open the air inlet grille, push the arm
3) Push "PUSH" part under the front panel and
4) Remove the front panel fixing screws.
5) Take off 4 hooks of panel from rear side.
<How to assemble the front panel>
1) Push 3 center positions and 2 lower center
2) Tighten four screws.
Procedures
turn off its main power supply.
toward the outside, and remove the grille.
remove hooks of the front panel from the
installation plate.
(4 pcs.)
positions of the air outlet, and then hang
the hanging hooks (4 pcs.) at the top side
of the front panel to the rear plate.
• Incomplete hanging or incomplete
pushing may cause a dewdrops or
generation of a fluttering sound.
136
Remarks
Installation plate
Front panel
Push
4 screws
4 hooks