JMC JIMMY 1993 Owner's Manual page 92

Features & Controls
PO1 63
The transfer case shift lever is on the floor to the right of the driver. Use this
lever to shift into and out of four-wheel drive. An indicator light near the lever
shows you the transfer case settings:
2 WHEEL
4 HIGH
N SET PARKING BRAKE
4 LOW
The front axle portion of the diagram on the indicator will light up when you
shift into four-wheel drive. A slight delay between shifting and the pattern's
lighting is normal. I f the pattern does not light up, or
if
the front axle does
not go out after you shift out of four-wheel drive, have your dealer check
your system. Turn the dial above your headlight switch to the left to dim your
transfer case indicator light when your headlights or parking lights are on.
2 WHEEL: This setting is for driving in most street and highway situations.
Your front axle is not engaged in two-wheel drive.
4
HIGH: This setting engages your front axle to help drive your vehicle. Use
4 HIGH when you need extra traction, such as on snowy or icy roads, or in
most off-road situations.
N SET PARKING BRAKE: Shift to this neutral setting only when your vehicle
needs to be towed.
2-32