Windshield Wipers - JMC JIMMY 1993 Owner's Manual

To change the headlights from low beam to high or high to low, pull the turn
signal lever all the way toward you. Then release it. When the high beams
are on, a blue light on the instrument panel also will be on.
Windshield Wipers
I
PO1 80
For a single wiping cycle, turn the band to MIST. Hold
it
there until the
wipers start, then let go. The wipers will stop after one cycle.
If
you want
more cycles, hold the band on MIST longer.
For steady wiping at low speed, turn the band away from you to the LO
position.
For
high speed wiping, turn the band further, to HI. To stop the
wipers, move the band to the off symbol.
2-41