JMC JIMMY 1993 Owner's Manual page 164

Table of Contents

Advertisement

Comfort Controls & Audio Systems
SEEK
Pressing the SEEK button will cause the receiver to SEEK the next higher
station and stop.
SCAN
When you press SCAN, the radio will go to the next station and pause and
will keep scanning until
you press SCAN again. SCAN appears in the graphic
display.
Pushbuttons
The four pushbuttons let you return to favorite stations.
You can set the
pushbuttons for up to fourteen favorite stations
(7 AM and 7 FM). Just:
Tune in the desired station.
Press the SET pushbutton. (NOTE: The display
wi l l show SET for about
Within the
5
seconds, push one of the four pushbuttons. Whenever you
5 seconds.)
press that button, the preset station will return.
NOTE:
In addition to the four stations set as above, up
to three additional stations
may be preset on each band by pressing two adjoining buttons at the
same
time. Just:
Tune in the desired station.
Press the SET pushbutton.
i
Within
5
seconds, press any two adjoining pushbuttons at the same timt
(The station will return when the same two buttons are pressed again.)
Clock
To set the clock, just:
Push the SET pushbutton.
Within
5
seconds, press and hold
SEEK until the correct minute appears
Press and hold SCAN until the correct hour appears on the display.
on the display.
Adjust The Tone
Use the levers in the upper left corner to set the bass, midrange, and treble
until you get the sound you want. The
60
and
250
levers adjust the bass; 1K
is midrange; and 3.5K and 10K control the treble.
We
suggest you start with the center lever (1K) in the midpoint position, then
move the others up
until you get the amount of bass and treble you like.
3-1 8

Advertisement

Table of Contents
loading

Table of Contents