JMC JIMMY 1993 Owner's Manual page 283

To check the fluid hot or cold:
Park your vehicle on a level place.
Place the shift lever
in P (Park) with the parking
'brake applied.
With your foot on the brake pedal, move the shift lever through each
gear range, pausing for about three seconds in each range. Then,
position the shift lever in P (Park).
Let the engine run at idle
for three minutes or more.
Then, without shutting
off the engine, follow these steps:
PO164
1. Flip the handle up and then pull out the dipstick and wipe it with a
2.
Push
it
back in all the way, wait three seconds and then pull it back out
clean rag or paper towel.
again. Flip top handle should remain in open position.
6-1
7