JMC JIMMY 1993 Owner's Manual page 82

Features & Contmls
speed as you go down steep mountain roads,
but
then you would also
want
to
use your brakes off and on.
I f you have a 4,3L engine (Codes Z and W) and i f you manually select
2, the transmission w i l l drive in second gear. You may use
this feature
for reducing torque to the rear wheels when you are trying to start your
vehicle from a stop on slippery road surfaces.
1 (First Gear). This position gives you even more power (but lower fuel
economy) than 2. You can use it on very steep hills,
or in deep snow or
mud. If the selector lever is put in 1, the transmission won't shift into
first gear until the vehicle
is
going slowly enough.
. . . . . ~.
~ ~
FivemSpead Manual Ilansmissiun
This is the shift pattern. Here's how
to
operate your transmission:
1 (First Gear)-Press the clutch pedal and shift into 1. Then, slowly let
up on the clutch pedal as you press the accelerator pedal.
2-22