Other Maintenance Items - JMC JIMMY 1993 Owner's Manual

Service & Appearance Care
Other Maintenance Items
Hydraulic Clutch Grease Fitting
If you have the 4.3L (VIN code 2) engine with a manual transmission, a
grease fitting is on the clutch housing for lubricating the clutch fork ball stud.
Refer to the Maintenance Schedule for information on how to lubricate the
clutch housing, and what type of lubricant to use.
Be
sure not to over-fill
because you could damage your clutch.
wont Subpension and Steering Linkage
Refer to the Maintenance Schedule to determine how often to lubricate the
fittings and what type of lubricant to use.
Fronf Wheel Bearings (Two-Wheel Drive)
If your vehicle is two-wheel drive, it has wheel bearings that must be cleaned
and repacked..
Refer to the Maintenance Schedule to determine how often this must be
done.
Single Belt Accessory Drive
Your new vehicle uses a serpentine belt that
i s
lighter, and more durable than
systems with several belts.
The belt runs over or around the pulleys on the engine. A tensioner is used
to keep the belt tight at all times. The tensioner
also makes replacing the
belt easier. If you need to replace the belt, be sure
to get the correct
replacement belt. Your dealership or parts supplier can help you with this.
The Accessory Drive Belt Routing label on your vehicle wi l l show you how to
route the belt your vehicle uses.
6-34