JMC JIMMY 1993 Owner's Manual page 145

Table of Contents

Advertisement

You can adjust the cross rails
to handle different size loads. Just loosen the
slider screws at each end
of the cross rail and move them where you want
them. Make sure both sides
of the cross rail are even, then tighten the slider
screws.
Be sure the cargo is properly loaded.
Carrying small, heavy loads on the
roof is not recommended.
Tie the load
to the moveable tie downs, (two per each side
of the
siderails). Use the cross rails only
to keep the load from sliding.
I f you need to carry long items, move the cross rails .as far apart
as
possible. Tie the load
to the moveable tie downs provided
in the side
rails. Also tie the load
to the bumpers. Do not tie the load so tightly that
the cross rails or side rails are damaged.
NOTICE
Don't exceed the maximum vehicle capacity when loading your vehicle.
For
more information on vehicle capacity and loading, see "Loading Your Vehicle''
in the Index.
To prevent damage or
loss
of cargo as you're driving, check now and then
to
make sure the luggage carrier and cargo are still securely fastened.
2-85

Advertisement

Table of Contents
loading

Table of Contents